Questions? Call us: 1-800-214-7060

dynaQ™

Technology Tip: Software and Audits Top 10

April 18, 2017 - Kestrel Management • dynaQ

All types of business and operational processes demand a variety of audits and inspections to evaluate compliance with standards—ranging from government regulations, to industry codes, to system standards (i.e., ISO), to internal corporate requirements.

Audits provide an essential tool for improving and verifying compliance performance. Audits may be used to capture regulatory compliance status, management system conformance, adequacy of internal controls, potential risks, and best practices.

By combining effective auditing program design, standardized procedures, trained/knowledgeable auditors, and computerized systems and tools, companies are better able to capture and analyze audit data, and then use that information to improve business performance. Having auditing software of some sort can greatly streamline productivity and enhance quality, especially in industries with many compliance obligations.

The following tips can help ensure that companies are getting the most out of their auditing process:

  1. Have a computerized system. Any system is better than nothing; functional is more important than perfect. The key is to commit to a choice and move forward with it. Companies are beginning to recognize the pitfalls of “smart people” audits (i.e., an audit conducted by an expert + notebook with no protocols or systems). While expertise is valuable, this approach makes it difficult to compare facilities and results, is not replicable, and provides no assurance that everything has been reviewed. A defined system and protocol helps to avoid these pitfalls.
  1. Invest time before the audit. The most important time in the audit process is before the audit begins. Do not wait until the day before to prepare. There is value in knowing the scope of the audit, understanding expectations, and developing question sets/protocol. This is also the time to ensure that the system collects the data desired to produce the final report.
  1. Capture data. Data is tangible. You can count, sort, compare, and organize data so it can be used on the back end. Data allows the company to produce reports, analytics, and standard metrics/key performance indicators.
  1. Don’t forget about information. Information is important, too. Information provides descriptions, directions, photos, etc. to support the data and paint a complete picture.
  1. Be timely. Reports must be timely to correct findings and demonstrate a sense of urgency. Reports serve as a permanent record and begin the process of remediation. The sooner they are produced, the sooner corrective actions begin.
  1. Note immediate fixes. During the audit, there may be small things uncovered that can be fixed immediately. These items need to be recorded even if they are fixed during the audit. Unrecorded items “never happened”. Correspondingly, it is important to build a culture where individuals are not punished for findings, as this can result in underreporting.
  1. Understand the audience. Who will be reading the final report? What do they need to know? What is their level of understanding? Not all data presentation is useful. In fact, poorly presented data can be confusing and cause inaction. It is important to identify key data, reports desired, and the ways in which outputs can be automated to generate meaningful information.
  1. Compare to previous audits. The only way to get an accurate comparison is if audits have a common scope and a common checklist/protocol. Using a computerized system can ensure that these factors remain consistent. Comparisons reinforce and support a company’s efforts to maintain and improve compliance over time.
  1. Manage regulatory updates. It is important to maintain a connection to past audits and the associated compliance requirements at the time of the audit. Regulations might change and that needs to be tracked. Checklists, however, may remain the same. Companies should have a process for tracking regulatory updates and making sure that the system is updated appropriately.
  1. Maintain data frequency. For data, frequency is key. Consider what smaller scope, higher frequency audits look like. These can allow the company to gather more data, involve more people, and improve the overall quality and reliability of reports.

A well-designed and well-executed auditing program—with analysis of audit data—provides an essential tool for improving and verifying business performance. Audits capture regulatory compliance status, management system conformance, adequacy of internal controls, potential risks, and best practices. And using a technology tool or system to manage the audit makes that information even more useful.

Submitted by: Evan Fitzgerald

Connect with Kestrel at ASSE Safety 2016 June 26-28

June 1, 2016 - Kestrel Management • dynaQ

Safety is everyone’s responsibility. June 26-28, the ASSE Safety 2016 Professional Development Conference & Exhibition will bring together some of the most knowledgeable safety experts in the industry to talk about the latest topics and trends in safety.

Kestrel Management will be attending again this year, and we would enjoy the opportunity to connect with you in Atlanta to discuss how you can reduce risk and increase safety in your organization.

ASSE Safety 2016 Expo
June 26-28, 2016
Georgia World Congress Center
Atlanta, Georgia
Booth #2417

Visit Kestrel at booth #2417 and check out the current projects and services we’re providing in the realm of safety—plus the latest advancements in dynaQ, our flexible assessment software, and other technology solutions we are developing.

Submitted by: Jesse Kunes

Join Kestrel for the WSC Annual Safety & Health Conference May 16-18

May 9, 2016 - Kestrel Management • dynaQ

The need for a systematic program to efficiently assess safety compliance is critical to maintain regulatory compliance and safety performance.

Join Kestrel at the 74th Annual Wisconsin Safety & Health Conference & Expo. We look forward to catching up with you in the Dells, and learning more about how you are working to meet your safety goals.

Wisconsin Safety & Health Conference
May 16-18, 2016
Kalahari Resort, Wisconsin Dells
Booth #1315

Flexible Assessment Software: dynaQ™

Businesses often use multiple tools to support a safety management program. Since its creation, Kestrel’s dynaQ™ software has been an integral platform for reducing the effort and cost associated with managing company requirements and obligations across operations.

Stop by Kestrel’s booth (#1315) at the show to learn more about dynaQ™’s functionality, and to discuss how Kestrel can assist you with your ongoing safety efforts. 

Submitted by: Jesse Kunes

Pull vs. Push Reporting: Leading KPI Development

April 22, 2016 - Kestrel Management • dynaQ

Key performance indicator (KPI) is, arguably, one of the biggest buzzwords of the decade. If you want someone’s attention, mention KPIs. According to Investopedia, KPIs are “a set of quantifiable measures that a company or industry uses to gauge or compare performance in terms of meeting their strategic and operational goals.”

For some individual practices—financials, inventory, sales—KPIs are relatively standard. For example, a company may measure revenue growth year after year as a standard KPI. As we bridge into operational practices with varying numbers of employees and levels of risk, however, it can become more difficult to understand not only how to establish KPIs but also where to get the data.

Technology can help to create a pull-to-push methodology that puts site-specific leading KPIs at stakeholders’ fingertips.

Leading vs. Lagging Indicators

In order to understand how to use this pull-to-push methodology to create leading KPIs, it is important to first understand the concept of leading versus lagging indicators.

  • Lagging indicators measure and help track how the company is performing in comparison to its goals. Lagging indicators are usually fairly easy to measure—but they can be hard to influence because what they are measuring has already happened or performance data already captured. In this way, lagging indicators are backward-focused. Many standard performance metrics are lagging. In safety, for example, the Recordable Incident Rate is a lagging indicator. Important information to know but hard to change.
  • Leading indicators signify the direction performance is going. Because leading indicators come before a trend, they are often seen as business drivers and should be incorporated into the business strategy. The forward-looking nature of leading indicators may make them harder to measure and they may change quickly; however, leading indicators are generally easier to influence. A good example of a leading indicator is determining the most common causes of an incident before it happens to prevent future recurrence, thereby impacting performance.

Pull vs. Push Metrics

That brings us back to the pull-to-push methodology. Or, in essence, digging for metrics versus having KPIs sent directly to the appropriate stakeholders.

With a push approach, metrics are literally “pushed” to end-users, who then extract meaningful insights and take appropriate actions for themselves. Push metrics can have a number of components that trigger when (and who) metrics are sent to, including threshold, capacity, severity, and timing.

Conversely, with a pull approach, data is pulled in order to answer specific business questions. Pull metrics generally require someone with analytical skills to dig deeper into the data to identify the desired metrics.

While pull metrics may be more time consuming to identify and obtain, that doesn’t mean pull metrics aren’t important to have. In fact, organizations often need to pull data in order to create the push metrics that provide for standard KPIs. And push metrics may demand you circle back and pull further information. In reality, the process is cyclical: pull produces what should be pushed; push cycles back to pull in order to dig deeper into the details.

Creating Standard KPIs

How does an organization, then, get to the point of having standard KPIs that can be pushed when needed and that don’t require the time and investment associated with digging for information?

Technology can help to create that pull-to-push methodology for creating standard KPIs. This requires a number of things:

  1. The program must be well-established and designed with the operational requirements, capacity, tools, and skills to effectively integrate the program itself and associated data with technology.
  2. Assuming a program such as this is developed, initial reports can be pulled to check the program’s effectiveness based on a number of key attributes/metrics. This yields analyzable data.
  3. This data should be explored in many different ways. This allows the company to start seeing the interaction between stakeholders and the data and, eventually, creates the “a-ha” moment of understanding as to what metrics are important and meaningful.
  4. At this point, it becomes possible to begin comparing data and metrics on a periodic basis, while continuing to pull information from technology. Remembering what queries are effective will aid in establishing initial leading KPIs. This process also will yield improved understanding of how the data gathering process (e.g., incident investigation) needs to be improved and standardized for more reliable pull of information.
  5. This comparison of data should then be used to discover what data is beneficial and what information needs to be more granular to really hone in on the standard KPI.

Walking through this process and leveraging available technology makes it possible to effectively transition from pull methodology to push reporting—putting leading KPIs in the hands of decision makers and identified stakeholders.

Submitted by: Jesse Kunes

Talk Safety with Kestrel at ICUEE 2015

September 15, 2015 - Kestrel Management • dynaQ

ICUEE – The Demo Expo – is the premiere event for utility industry professionals to gain comprehensive insight into the latest technologies, innovations, insights, and trends affecting their industry. Kestrel Management will be at ICUEE again this year to talk with you about safety, technology, and your ongoing business needs. Stop by and see us!

ICUEE 2015
September 29 – October 1, 2015
Kentucky Exposition Center Louisville, Kentucky
Kestrel Booth #3217

Kestrel Presentation: Driving Safety Culture to the Front Line

Kestrel will also be teaming with MasTec North America to present a case study on how technology can help drive safety performance–you won’t want to miss it!

Driving Safety Culture to the Front Line
Tuesday, September 29 at 2:30 p.m.

Jarrett Quoyle of MasTec North America will share his experience establishing a front-line safety culture through the use of field safety inspection software. Kestrel’s Jesse Kunes will lead a discussion about the technology used to support MasTec’s safety activities. Expect to gain a better understanding of how to:

  • Establish safety accountability as part of the job
  • Collaborate and share safety results
  • Link results with improvement initiatives

After the presentation, be sure to stop by Booth #3217 to talk directly with Kestrel’s safety and software experts. We look forward to seeing you in Louisville!

Using Mobile Technology to Turn Data into Information

August 19, 2015 - Kestrel Management • dynaQ

A decade ago, when handheld computers first became popular, storing appointments and contact information on a portable electronic device was a convenient way to avoid lugging around your appointment calendar. Mobile technology has come a long way in the last few years; today’s smartphones are capable of much more.

Many mobile devices are as powerful as a desktop computer. They have processors that handle internet access, photos, voice recordings, and database applications. They allow viewing of documents, reports, presentations, and video files. They integrate cellular technology, digital networks, email, scanners, a world of Bluetooth devices, and global positioning systems (GPS).

As mighty as they may be, mobile devices have not replaced laptop computers because of their limited keyboards, screen sizes, and computing power. But the line between laptops and smartphones has blurred substantially. Mobile technology offers ways to become more efficient and provides more value to company operations and management systems.

Find & Fix

Traditional processes tend to produce traditional results. One cannot expect technological innovation without technological integration. Integration allows companies to stretch and empower every limited resource. The key is identifying those traditional processes that will realize benefit (mostly likely cost or time savings) from technological integration.

Take the business practice of internal auditing for example. The most traditional practice for internal auditing an aspect of a company (e.g., general safe practices, OSHA compliance, OHSAS 18001) is a “find it & fix it” cycle, where the internal inspector goes into a facility and inspects operations as they exist. The inspector typically walks a facility with a notepad and pencil, taking notes of field observations that are not in compliance with the defined protocol.

Following the audit, the inspector creates a report and shares the findings with a responsible party. Sometimes the process of creating a report and communicating findings can take weeks or even months. The cycle is repeated when the inspector comes back to check the site at a later time.

The “find & fix” inspection cycle works—but only to a point.

Same Old Methods: Same Old Problems

The difficult part comes next. What happens to that inspection form or accident investigation report after it is completed? It is likely reviewed by a few people, perhaps transcribed into electronic form by a data entry clerk (where data entry errors may enter the equation), and filed away for legal and compliance reasons, rarely (if ever) to be seen again.

Filing data away in a drawer is better than nothing—it at least shows some documentation of findings— but what happens when the inspector is asked to compile annual data from the findings? And how are trends and patterns evaluated to best allocate resources for improvement initiatives? The paper method of recordkeeping makes compiling field data into a report an enormous task consuming resources and money.

Electronic Data Capture and Reporting

When the inspector captures all field data electronically, the task of generating a report to analyze trends becomes much easier. Mobile technology allows the inspector to capture data electronically—in the field, at the point of discovery—and can eliminate the problems associated with manual data entry and manipulation.

And when data is collected, uploaded, and stored in a database, accessing and reporting on the data becomes as easy as simply requesting the desired information—from questions like, “How many deficient issues were there at the warehouse last year?” to “How many overdue action items does Bruce have in repackaging?”

Reports generated can include photos and reference information, along with field comments. These reports support the inspector’s findings and eliminate many questions about whether a situation is accurately described and/or in violation of the defined protocol. With this information, reports also become a valuable learning tool for employees in the field.

Once uploaded, data are stored in a database for later reference. Assessments continue to be added as inspections are performed and a large bank of data is amassed. That data in electronic format, unlike hand-written notes that are filed away, can be easily arranged for future analysis. Reports can be generated using a large menu of criteria that address specific business needs, such as running statistics on a site over a period time or reviewing instances of a particular violation.

Not only is reporting easier, it can serve more needs:

  • Certain reports provide a means of internal communication, enabling transparency and creating clear accountability.
  • Automated notifications provide real-time safety improvements.
  • Follow-up actions can be assigned and sent to those who need them.
  • Reports on action status can be sent as reminders to each assignee.
  • Follow-up reports can show photo evidence from the point of discovery, cite the relevant regulatory reference, and encourage continued improvement.
  • Positive observations can be used to provide positive feedback to those employees who have met or exceeded expectations.
  • Mining data in different ways can help to identify root causes and end harmful trends so that real improvement can occur.

Value of Good Software

Even with all of the power and functionality that mobile devices offer, they are of limited value without good software. Software applications use the mobile device’s power, synchronize with web and network applications, and use new programming languages.

A number of management efficiencies are realized when auditing/inspection software offers:

  • Consistency: Pre-defined answers allow users to answer consistently to like situations, lessening the potential for inconsistent interpretation of the responses from one inspector to the next.
  • Standardization: Providing a centrally located database with standard criteria helps ensure that all facilities are on the same page.
  • Consensus: On priority rating of inspection findings.
  • Tracking: The ability to assign and check status of fixes and corrective/preventive actions helps ensure compliance.
  • Analysis: Results can be analyzed for relative importance, statistics, comparisons, patterns, trends, and, ultimately, to identify root causes.

Looking Forward

Our world continues to demand faster response times, constant internet connectivity, and immediate access to information. Technology manufacturers have responded, as we continue to see the emergence of hybrid devices that incorporate laptop computer capability with cellular technology.

The growth of mobile devices has accelerated to the point where they can be a huge asset to company operations:

  • Provide electronic data collection
  • Integrate data from different types of media
  • Offer data management to organize reference materials, inspection protocols, and field data
  • Immediately generate reports
  • Easily assign and track follow-up actions
  • Educate employees and eliminate confusion
  • Query and organize data for analysis to discover trends and identify root causes

Ultimately, the goal is to continually improve the company’s overall performance—health & safety, environmental, quality, overall business. Fortunately, technology can enhance traditional business practices, such as the “find & fix it” inspection cycle, to create greater efficiencies and enhanced business value. Integrating technology with current business practices not only allows for continual improvement, it helps create the next level of competitive advantage.

Submitted by: Jesse Kunes

Don’t Miss Kestrel at ChemEdge

July 21, 2015 - Kestrel Management • dynaQ

For years, Kestrel has partnered with NACD to help chemical distributors manage their difficult operational and EHS issues. Kestrel will once again be at ChemEdge in St. Louis on August 11-14 (booth #404) to:

  • Discuss attendees’ EHS needs
  • Introduce Kestrel’s Right-Sized Compliance offering
  • Demo the Responsible Distribution powered by dyanQonline software

Hope to see you in St. Louis!

Submitted by: Jesse Kunes

Catch Kestrel at the NACD Central Region Meeting June 8-10 in Itasca, IL

May 26, 2015 - Kestrel Management

For years, Kestrel Management has partnered with NACD to help chemical distributors manage their difficult operational and environmental, health and safety (EHS) issues.

Kestrel will once again be at NACD’s Central Region Meeting in Itasca, IL, June 8-10, to discuss members’ EHS needs, to talk about Responsible Distribution Online powered by dynaQonline™, and to tell members more about our Right-Sized Compliance offering, Kestrel’s programmatic EHS management approach designed to help companies without a dedicated EHS staff sustain ongoing EHS compliance. Look for us there!

 Submitted by: Jake Taylor

Join Kestrel at ASSE’s Safety 2015 Expo

May 21, 2015 - Kestrel Management • dynaQ

Safety is everyone’s responsibility. June 7-10, the ASSE Safety 2015 Professional Development Conference & Exhibition will bring together some of the most knowledgeable safety experts in the industry to talk about the latest topics and trends in safety.

Kestrel Management will be attending again this year, and we would enjoy the opportunity to connect with you in Dallas to discuss your safety needs.

ASSE Safety 2015 Expo
June 7-10, 2015
Kay Bailey Hutchison Convention Center
Dallas, Texas
Booth #2620

Visit Kestrel at booth #2620 and check out the current projects and services we’re providing in the realm of safety—plus the latest advancements in dynaQTM, our flexible assessment software.

 Submitted by: Jesse Kunes

Kestrel Exhibits at Wisconsin Safety & Health Conference

April 9, 2015 - Kestrel Management • dynaQ

The need for a systematic program to efficiently assess safety compliance is critical to maintain regulatory compliance and safety performance.

Join Kestrel at the 73rd Annual Wisconsin Safety & Health Conference & Expo learn more about how Kestrel can help you meet your safety goals.

Wisconsin Safety & Health Conference
April 20-22, 2015
Kalahari Resort, Wisconsin Dells
Booth #1315

Flexible Assessment Software: dynaQ

Businesses often use multiple tools to support a safety management program. Since its creation, Kestrel’s dynaQ™ software has been an integral platform for reducing the effort and cost associated with managing company requirements and obligations across operations.

Stop by Kestrel’s booth (#1315) at the show to learn more about dynaQ™’s functionality, and to discuss how Kestrel can assist you with your ongoing safety efforts.

 Submitted by: Jesse Kunes

Insights & Updates

  • Categories

  • Archives